Bulbs for LED Spotlights

Choosing Bulbs for LED Spotlights

Replacing or retro-fitting traditional spotlights with LED bulbs is an effective way to transition to energy-efficient illumination. During the process, individuals must select specific types of bulbs, in order to maintain a similar, tight beam configuration that is commonly associated with LED spotlights.

On the market, two options include parabolic aluminized reflector bulbs or PAR and multi-faceted reflector bulbs or MR.

MR LED Spotlight Bulbs

MR LED spotlight bulbs emit a narrow beam angle, ranging between 15 degrees and 45 degrees. Compared to a PAR LED bulb, this unit caters to far-flung objects. Moreover, MR bulbs can be found in compact lamp heads – roughly measuring two inches or less. Traditionally, MR bulbs were designed to improve the beam structure of halogen fixtures.

The numerical designation associated with the specific type of MR LED bulb refers to its respective size (expressed in 1/8”). This expression is also applicable to PAR LED spotlight bulbs. It is important to consider that such designations only serve the size of the bulbs. Color temperature and other lighting characteristics may vary, based on the product.

PAR LED Spotlight Bulbs

PAR LED bulbs offer a wider beam angle than MR LED variants. Such units come with a beam configuration wider than 45 degrees. Common PAR LED sizes include the following: PAR38, PAR30, PAR20 and PAR16. PAR38 spotlight bulbs are noticeably wider and provide brighter illumination; while PAR16 units – at the other end of the spectrum – are generally smaller, provide less illumination and operate at lower wattages.

PAR LED spotlight bulbs can be found in industrial, commercial and residential spaces. Rooms that require wider beam configurations may benefit from BR LED bulbs. Lastly, when unsure about the type of LED spotlight bulb needed for a lighting system, it is advisable to check the label or sticker on the device for guidance.

5 Practical Uses For LED Spotlights

If you know the limitations and practical applications of using led lights in your home, you will make it a point of duty to buy one for your house just like many other homeowners have done.

Though led lights can be applied to several areas of the house, it is more effective in some areas than the others. This is what you will discover in this short guide.

Specifically, you will discover 5 areas where it is practicable for you to use led lights.

  1. Improve your existing decoration

The use of led lights doesn’t have to clash with your sense of style; rather, it should blend with your existing decoration. There are a wide variety of modern and contemporary led lights that can suitable for your home regardless of your current decor choice. You can choose that suits your kids’ bedrooms, media spaces, bathrooms, dining spaces, living rooms and kitchen.

  1. They are economically friendly

Don’t we all seek to reduce our energy bills even if it’s just on the short-term basis?

Well, an effective option for reducing your energy bills is to use led lights. Apart from lowering your energy bills, led lights don’t leave any carbon footprint. Though they might be a little costlier than the normal bulb, they contain environmentally friendly products.

  1. Outdoor purposes

The pathway to the front door or the garden is examples of outdoor places where you can use led lights. To make them very effective especially when you are holding get-togethers or having a lot of guests where you want to light their pathways, you can arrange these led lights in sets.  These sets are usually available at most lawn and garden as well as home decor retailers.

  1. Spaces that needs small lighting

The most common example of such space is under the cabinet in the kitchen and in the bathrooms. You can also add them to areas within your house which already have a major lighting available. There are various designs and sizes that are available for this purpose. For most average homeowners, these led lights are highly affordable.

  1. Lighting specific areas

This is different from lighting the spaces discussed in number 4 above, here we are talking about lighting specific areas of your home where you want visitors to immediately recognize.

For example, the bookshelf. If there is an area of the shelf you want to highlight, you can put a LED light on that part of the shelf. You can have several led lights at different locations in the house since they aren’t that costly and are also energy efficient.

In conclusion, by using led lights, you can improve the existing decoration in your home, use them to light specific areas of the house and even have as many of them as you wish since they are energy and cost-friendly.

To get started with using led lights for these and any other purposes, get in touch with a lighting specialist.

LED Sternlights

LED Sternlights for Boats and Vessels 101

Navigation lights for boats are crucial components for safety and compliance. In the US, the United States Coast Guard requires certain types of boats in the water to display the following: masthead light, side lights and/or led sternlights.

This article dives into LED options for sternlights and their applications in navigational safety.

What is an LED Sternlight?

An LED sternlight for boats is a compact and powerful light installed at the back of the boat or vessel. Ideally, the luminary should be installed as far back on the boat or stern as possible for maximum visibility.

The unit must also emit a constant, non-strobing beam with a beam angle of 135 degrees. When installed properly, the beam should be slightly visible from both sides and fully visible when viewing the boat from the back.

LEDs are perfect for sternlighting systems, due to their long lifespans. Because the units must be kept on at all times (constant illumination), operators do not have to spend time on maintaining or re-lamping the fixtures. In most cases, LED sternlights are mounted or secured on a pole for visibility. Some vessels tilt the light head slightly downwards to reduce light spillage or trespass.

Why Use an LED Sternlight? (Applications)

The first reason individuals should consider installing an LED sternlight on their boat is compliance with marine regulations. Some types of boats, such as a sailboat that is active at night, are required to utilize a sternlight for safety.

Next, LED sternlights for vessels promote safety and decrease the possibility of collisions. The units are designed to notify other boaters about the direction the vessel is heading, based on the amount of visible light from the lamp.

To ensure proper use, it is important to test the visibility of the LED boat fixtures before deployment in the water.

 

 

 

LED Lights for Boats — Choosing Yours

Six things to consider when coming up with the switch to LED spotlights. LED navigation signals last longer and offer greater efficiency than old-fashioned incandescent navigation signals. Light-emitting diodes have spawned a revolution in marine lighting.

In addition to providing productive onboard and underwater illumination, excellent LEDs can help light just how on docks, bettering safe practices even before you can get on the boat.

Insist upon Marine Level LED Lighting

Resist the enticement to set up nonmarine lights on your motorboat. Marine-grade LEDs feature housings that avoid corrosion in a saltwater environment, while others — even LEDs created for outdoor and garden uses — will probably succumb to the rigors of briny applications.

LED spotlights for watercraft also come covered to prevent drinking water intrusion. Look for the highest waterproof evaluations of IP 67 and IP 6K9K.

Research Coastline Guard Compliance

Make certain the new LEDs meet Coast Guard regulations and guidelines arranged by the North american Fishing boat and Yacht Council. Red (slot) and green (starboard) part marker signals, for example, should light up a sector spanning 112.5 certifications from dead in advance to aft on each aspect.

In addition, each LED nav light — like the white all-around light — should meet the Coast Safeguard and ABYC requirements for awareness range. These legislation change with the size of the vessel, but also for ships under 40 foot, the required presence range is 2 nautical mls.

Use the Right Lighting Angles

The angle of illumination serves an important function and is basically determined by the zoom lens. For courtesy and spreader signals, for instance, you want a fairly large beam — at least 50 diplomas — to adequately light up a cockpit or walkway. A broad beam also helps minimize dark shadows that might impair visibility.

For a LED spotlights, on the other hands, a narrower beam of about 20 certifications better targets a specific subject and direction, whether it is near or very good.

Select LEDs While using Same Footprint

If you are replacing a vintage incandescent, try to select an LED that suits the same cutout or bracket, a practice that will save you time, work and profit patching or enlarging slots or creating an adapter for the new LED fixture. This shows especially important when retrofitting your motorboat with underwater LEDs. Fixing a gap below the waterline can get expensive.

Finding an comparable replacement might not continually be possible, but these matchups do can be found. Hella’s SLIMLINE LED courtesy signals, for example, fit the same hole as the old Perko circular incandescent courtesy lamps — a swap-out I made on my motorboat a couple of years ago.

No. 5: Avoid EMI

A regulator within the LED spotlights microcircuit constantly switches voltage to the diode off and on. In case the regulator is not properly shielded, the line resulting in the LED emits radio frequencies that interfere with onboard consumer electronics. This electromagnetic disturbance can manifest in peculiarities such as VHF radiointerference, static over a stereo system, and “hash” over a fish-finder screen. The ultimate way to avoid EMI is to look for the “CE” designation on the marine LED fixture. This indicates that the manufacturer has complied with Conformit? Europ?enne (European conformity) in shielding the LED.

Lastly, Don’t go overboard in your zest for sea LED spotlights. Carefully select, set up and utilize LED technology, and you’ll improve your vessel, your angling experience as well as your safety when sportfishing at night.

Improving Safety in Marine Environments with Remote Controlled LED Spotlights

Improving Safety in Marine Environments with Remote Controlled LED Spotlights

In order to boost illumination in marine-based facilities, LED spotlights are mounted on poles or other hard-to-reach locations. This allows the units to cast light beams over the target area with minimal obstruction.

Unfortunately, such mounting options reduce access to the LED fixture. As a result, the operator’s safety is greatly compromised, every time the individual uses or makes adjustment to the luminary.

Benefits of Hands-free Operation

A solution to this issue is the application of remote controlled LED spotlights. These cutting-edge lamps are designed to be operated at a safe distance, via a handheld (wireless) controller. When used in dangerous work sites, operators do not have to be in direct contact with the LED spotlight all the time.

For example, an LED spotlight mounted on a boat rack is perfect for casting light on the surface of the water. However, equipment towers are often bulky and out of reach. With a remote controlled LED spotlight, one does not have to stop the boat or leave the captain’s chair to adjust direction of the beam. Moreover, it would be possible to participate in several tasks at once, such as recovering gear from the water while keeping the light beam on the object. Visit this page for large online selection of boat spotlights.

Dangerous and Hazardous Location Sites

Another use for remote controlled LED spotlights is for illumination in dangerous work sites, such as construction and petrol refineries. In both locations, LED spotlights are mounted on heavy-duty equipment, such as cranes, pipes, rails and tanks.

Such equipment are exposed to hazardous materials on a regular basis, which can be harmful vapors, corrosive chemicals or large amounts of dust. To prevent exposure to flammable and deadly substances, operators may opt to leverage a remote controlled LED spotlight. By controlling the fixture with a handheld remote, the operator is able to stay out of harm’s way.

uscg approved lights

What are USCG Approved Lights for Boats?

The United States Coast Guard (USCG) governs and oversees large bodies of water in the country. Boaters are required to closely observe USCG regulations, when deploying vessels in oceans and lakes. A major highlight in USCG boating guidelines is the application of USCG approved lights. Reports of USCG patrollers issuing warnings and citations about the use of non-approved USCG lamps have increased, due to a spike in availability of low-quality fixtures for boats.

USCG Approved Lights 101

According to a 2015 USCG memo (Safety Alert 10-15), lights for recreational and commercial vessels must comply with Convention on the International Regulations for Preventing Collisions at Sea (72 COLREGS) or Inland Navigation Rules (33 CFR Subchapter E). Recommendations for light sources are not provided, implying that individuals can select any type of fixture, such as incandescent, metal halide or LEDs, to use on boats.

When a USCG warden inspects a lighting system on a vessel, he or she is on the lookout for specific labels on the fixtures. There should be ‘USCG Approval 33 CFR 183.810’ or ‘Meets ABYC A-16 guidelines’ (or similar) wording on the lamps. Additionally, markings from a recognized testing laboratory, such as ETL or UL, should also be present on the label.

Decorative Boat Lights vs USCG Boat Lights

Another important aspect of USCG-approved fixtures is performance. USCG officials discourage the use of decorative lighting on vessels. This is because such lighting systems can easily be mistaken for or obstruct existing navigation lights. For example, bright LED strip lights or boat spotlights which are commonly found on boats, can easily overpower red/green navigational fixtures (when installed within the same part of the vessel).

Lastly, the application of flashing decorative lights should be avoided (when possible), as the luminaries could provide a false impression of a law enforcement vessel patrolling the location.

truck lights

Choosing Trailer & Truck Lights For Boating Operations

Boating operations are mostly limited to large bodies of water. But before the vessels are deployed at the shore or dock, they must first be transported to the location. Due to the size of boats, most individuals use trailers, trucks or other heavy-duty hauling equipment, or even a large vessel. Like boats, these units utilize trailer & truck lights for navigation, visibility and safety.

Keep reading to learn more about choosing a set of luminaries for your trailer or truck for supporting marine operations at the dock.

Compact and Reliable

LEDs are the way to go for illumination during deployment and preparation at marine sites. They are compact and won’t get in your way when trying to fit in between tight spaces. The lights also consume less power, streamlining compatibility with low voltage requirements typically observed in automotive and marine systems. Furthermore, LEDs are solid state and offer better resistance against rough handling and outdoor elements.

It’s important to point out that individuals residing in the US or Canada must adhere to some of the same set of guidelines for trailer lighting systems. Such configurations include the application of an amber and red light close to the front axle (for side clearance), as well as conventional turning and stop lights. The size of the trailer being used, which depends on the size of the boat being hauled, will determine the application of other lighting configurations.

Mounting Options

There are several types of mounting options for truck lighting systems. For supporting boating operations, a remote-controlled LED light can be mounted on the roof of trucks, via a mounting plate. Such elevated positions allow the unit to illuminate the entire target area, from a safe distance. Handheld variants are also useful for setting up vessels near docks. A pistol-grip LED spot light is ideal for inspecting the water before deployment, with the use of intense, sharp beams capable of reaching far distances.

Lastly, because trailer and truck lights for boating operations are exposed to saltwater, they should take on corrosion resistant builds.

How to Find a Marine LED Light Bar for Your Boat

Marine LED lights are perfect for any boating brightness need. They produce the most light with theminimal amount of vitality and possess excellent reliability. They are lightweight and practically impervious to moisture and corrosion.

Compatible with Fishing Boat Electrical Systems

A typicalmarine LED lights functions with voltages from nine to 30 VDC, making them directly appropriate for electronic boat systems of 12 or 24 VDC.hmm

Built Specifically for Marine Use

LED light pubs are designed to endure off-road use and extreme ecological conditions. The best led lights for boats has additional corrosion level of resistance built-in to counteract sodium water exposure.

Boat LED Lighting Uses

Marine LED lamps illuminates the course forward, lenders, buoys and docks. It is also used for navigation signs and smoking cigarettes decks or compartments. Led lights for boats are available in any size, shape or colour, which makes locating the best marine LED lights bar for your application a breeze.

Types of Marine LED Light Bars

Areas and Floodlights

LED light bars serve as location beams, floodlights or a combo beam. The best quality light pubs used computer-designed optics that boost beam width and.

Wide Beam Light Bars

For the best navigation illumination, great, rectangular light bars up to 50 inches wide long supply the most night-splitting brightness.

Deck and Area Lighting

Small, circular marine LED lights pods or set strip lights to install just about any place. They are optimal for illuminating slots, bunks, cabins or use as courtesy equipment and lighting.

Flexible Remove Lights

There waterproof, flexible LED strip lighting applications are limited onlyby your imagination. They can be mounted everywhere to any size.

What to Search for in Marine LED Light Bars?

When it comes to led lights for boat bars in general, you get what you purchase. High-quality light pubs are recognised from cheaper copies by these factors:

  • They use top bin, high-efficiency, long-lasting LEDs such as CREE LEDs
  • The LED driver circuitry is suitable for super-tight current control that prolongs LED life
  • Circuit planks and housings are made to wick away high heat that problems LEDs
  • Housings and zoom lens are made from the most rugged materials
  • Custom, waterproof seals are being used between the cover and lens

Start with the Best Brands

Start your seek out the best marine LED light club by picking out the best brands such as Rigid, Baja Designs, Eye-sight X, KC HiLites, Cosmoblaze, Lazer Superstar and so forth. Each of these top manufacturers holds products built for marine situations.

Extra Protection for Marine Conditions

A LED lights for boatbar has additional coverage against exposure to marine conditions. The housings receive speciality coatings such as chromate, which resists sodium corrosion.

Also is a high-quality UV-resistant end. All screws and mounting hardware are marine-grade stainless steel. Pick a marine light club with a minimum ingress score of IP68 to ensure it is impervious to dampness.

Conclusion

Marine lighting operates under extreme environmental conditions and trustworthiness requirements, which explains why marine LED lights are the perfect lighting solution for motorboats.

Their versatility, efficiency as well as  ruggedness mean they can meet any light need with the least power sketch and with long-lasting steadiness.

Due to their light in weight and small size, they could be mounted almost everywhere. When shopping for any marine LED lights, they will be the obvious best choice.