LED Sternlights

LED Sternlights for Boats and Vessels 101

Navigation lights for boats are crucial components for safety and compliance. In the US, the United States Coast Guard requires certain types of boats in the water to display the following: masthead light, side lights and/or led sternlights.

This article dives into LED options for sternlights and their applications in navigational safety.

What is an LED Sternlight?

An LED sternlight for boats is a compact and powerful light installed at the back of the boat or vessel. Ideally, the luminary should be installed as far back on the boat or stern as possible for maximum visibility.

The unit must also emit a constant, non-strobing beam with a beam angle of 135 degrees. When installed properly, the beam should be slightly visible from both sides and fully visible when viewing the boat from the back.

LEDs are perfect for sternlighting systems, due to their long lifespans. Because the units must be kept on at all times (constant illumination), operators do not have to spend time on maintaining or re-lamping the fixtures. In most cases, LED sternlights are mounted or secured on a pole for visibility. Some vessels tilt the light head slightly downwards to reduce light spillage or trespass.

Why Use an LED Sternlight? (Applications)

The first reason individuals should consider installing an LED sternlight on their boat is compliance with marine regulations. Some types of boats, such as a sailboat that is active at night, are required to utilize a sternlight for safety.

Next, LED sternlights for vessels promote safety and decrease the possibility of collisions. The units are designed to notify other boaters about the direction the vessel is heading, based on the amount of visible light from the lamp.

To ensure proper use, it is important to test the visibility of the LED boat fixtures before deployment in the water.

 

 

 

marine lighting system

How to Get the Most Out of LED Retrofits for Marine Lighting Systems

Transitioning from outdated lighting systems, such as incandescent and fluorescent lamps, to LED Marine Lighting is a rewarding experience for businesses in the marine sector. Based on performance and cost, to get the most out the project, it is important to take certain factors into consideration. Timing, cost and assessment are example of factors that should be carefully addressed before commencing with an LED retrofit project.

Pricing and Delays

Yes, it is true that at this time, LEDs come with higher upfront costs. However, cost savings for marine LED lights must be calculated over its lifespan. Since LEDs offer over 50,000+ hours of illumination, operators at the marine site will be spending less time and money on maintenance and re-lamping.

Buying cheap, low-quality LEDs is not recommended, as such a decision may result in more frequent purchases due to risk of premature failure.

Another common mistake made by businesses in the marine industry is delaying LED retrofit projects. Because the units provide immediate cost savings after installation, one would end up missing out on decreased monthly energy bills. As an estimate, delaying an LED retrofit project for 30 days equates to forgoing five percent in savings during installation.

Expert Help

Depending on the type of LED retrofit installation, seeking help from a lighting specialist is advisable to ensure compliance and safety. This tip is highly applicable to projects that require additional wiring or replacement of fixture components. On the other hand, some boat LED lights are compatible with legacy lighting systems, allowing operators to simply switch out the bulbs.

Since LEDs have different illuminative properties and designs, it would also be helpful to seek consultation about various lighting setups and arrangements. Although such services can be costly, an optimized lighting configuration at the marine site may require less LED lamps (resulting is lower acquisition costs).

Improving Safety in Marine Environments with Remote Controlled LED Spotlights

Improving Safety in Marine Environments with Remote Controlled LED Spotlights

In order to boost illumination in marine-based facilities, LED spotlights are mounted on poles or other hard-to-reach locations. This allows the units to cast light beams over the target area with minimal obstruction.

Unfortunately, such mounting options reduce access to the LED fixture. As a result, the operator’s safety is greatly compromised, every time the individual uses or makes adjustment to the luminary.

Benefits of Hands-free Operation

A solution to this issue is the application of remote controlled LED spotlights. These cutting-edge lamps are designed to be operated at a safe distance, via a handheld (wireless) controller. When used in dangerous work sites, operators do not have to be in direct contact with the LED spotlight all the time.

For example, an LED spotlight mounted on a boat rack is perfect for casting light on the surface of the water. However, equipment towers are often bulky and out of reach. With a remote controlled LED spotlight, one does not have to stop the boat or leave the captain’s chair to adjust direction of the beam. Moreover, it would be possible to participate in several tasks at once, such as recovering gear from the water while keeping the light beam on the object. Visit this page for large online selection of boat spotlights.

Dangerous and Hazardous Location Sites

Another use for remote controlled LED spotlights is for illumination in dangerous work sites, such as construction and petrol refineries. In both locations, LED spotlights are mounted on heavy-duty equipment, such as cranes, pipes, rails and tanks.

Such equipment are exposed to hazardous materials on a regular basis, which can be harmful vapors, corrosive chemicals or large amounts of dust. To prevent exposure to flammable and deadly substances, operators may opt to leverage a remote controlled LED spotlight. By controlling the fixture with a handheld remote, the operator is able to stay out of harm’s way.